Want to know how to remove dead algae from pool bottom after killing them? Read our guide to get started!
How to kill algae in your pool should not only be the skill you need to acquire. After killing the algae, you are still left with the task of removing them from your pool water.
But how to remove dead algae from pool bottom?
For this task, you need to invest in a few pool equipment– the pool vacuum and the pool net These tools will help you get rid of the unsightly problem, keeping your pool looking clean and pristine.
Contents
- What Are The Things You Need?
- How To Remove Dead Algae From Pool Bottom
- 1. Test The Pool Water.
- 2. Run The Pool Pump Filtration System.
- 3. Remove The Algae Clumps And Other Debris.
- 4. Brush The Pool’s Sides And Flooring.
- 5. Vacuum The Pool Floor To Remove The Algae From The Bottom.
- 6. Brush The Pool Bottom Again And Then Vacuum.
- 7. Clean Your Pool Filters And Remove Stuck Algae.
- 8. Shock The Pool Water And Balance Its Chemistry.
- 9. Run The Pool Pump And Filtration System For 12 To 21 Hours.
What Are The Things You Need?
Aside from the two key pool equipment mentioned earlier, there are also other things that you need to prepare to remove the dead algae from your pool.
These things are listed below:
- Pool Vacuum
- Pool Pump Filtration System
- Pool Brush
- Pool Net
- Pool Water Test Strips
How To Remove Dead Algae From Pool Bottom
To know the step by step guide of the whole process, read on:
1. Test The Pool Water.
Testing the pool water gives you essential information about the water’s chemistry. It is important to maintain a good balance so that algae won’t have the opportunity to grow and infest the water again.
If you worry that the test might be difficult to conduct, good thing test strips now come as color-coded which makes it easier for beginners and first-timers to follow through with the testing process.
2. Run The Pool Pump Filtration System.
The second step is to turn on the filtration system and allow the water to run for a full cycle. This is to prevent the water from being stagnant and keeping the algae from settling in an environment wherein they can grow again.
3. Remove The Algae Clumps And Other Debris.
Now get the pool net you prepared earlier and start removing the large clumps of algae on the pool water’s surface.
While you can do this using bare hands, this is not advisable since it would take so much time. Moreover, the algae can be quite tricky to catch if you just use your hands. Using the net allows you to reach the algae in all corners.
4. Brush The Pool’s Sides And Flooring.
Using the pool brush, scrub all the sides of the pool. Also, include the pool steps and ladders, as well as the edges. After this, brush the flooring next to get rid of the algae that settle at the bottom of the pool.
Avoid brushing too harshly. You don’t want to damage the flooring of your pool. So just apply enough pressure, especially if the floor is made from delicate marble.
5. Vacuum The Pool Floor To Remove The Algae From The Bottom.
Set the pool vacuum and start vacuuming your pool. This step helps you remove the loose algae in the water. In addition, vacuuming also collects the debris and algae that may be hidden behind the pool stairs and ladders.
Although the robotic vacuum is a trend lately, it is better to do this step manually. You can guarantee the process if you handle it yourself.
6. Brush The Pool Bottom Again And Then Vacuum.
If you really want a thorough cleaning, you have to brush and vacuum the pool again just to make sure no algae are stuck on the walls and corners of the pool.
7. Clean Your Pool Filters And Remove Stuck Algae.
As you run the filtration system earlier, it is possible that some algae are also stuck in the filters. So, clean or replace the filters with a new one before you proceed to the next step.
Filters are a favorite hiding spot of algae; clean them once every 2 to 3 months. If the pool is used frequently, monthly cleaning is advisable.
8. Shock The Pool Water And Balance Its Chemistry.
Remember the first step in which you test the pool water? The presence of algae means that the pool water is a bit cloudy.
The most popular pool shock tablet is chlorine as it can keep the water sparkling clean and get rid of bacteria and algae.
9. Run The Pool Pump And Filtration System For 12 To 21 Hours.
After applying the chlorine and letting it settle in the water for a few hours, it is mandatory to allow the water to circulate by turning on the filtration system.
This allows the chlorine to pass through the pool pipes and system, killing the stubborn algae and bacteria inside.
Recommended Reading:
