When you maintain your pool, you must first pump out the water. For those who haven’t done it before, here are steps on how to pump water out of pool.
When you maintain your pool, there are going to be times when you’ll need to drain out extra water. This will prevent the pool from overflowing and also allow you to clean the important parts easily.
However, one very common question that may come to mind is, “how do I go about when I need to pump water out of my pool?”
Luckily, it’s actually not that hard to pump out the water from your pool. If you know how to pump water out of pool the proper way, then you’ll have no problem.
In this guide, we’re going to teach you the best way to pump water out of the pool so you won’t have trouble when you’re maintaining your inground pool during the off-season days.
Contents
How Often Should You Pump Water Out Of Your Pool?
You may be asking yourself how often you should pump the water out of the pool. Well, this depends on what you want to do. If you want to replace the water completely because the water is already too hard, then we recommend that you replace your pool water every 5 years. This process prompts you to take out all of the water and replace the pool with a new one.
But what if you just need to pump out water for maintenance?
Well, we recommend that you do it during the times when you don’t use the pool. Winter is one of the best times to slightly drain your pool so that it won’t overflow when the snow melts in the water. You can also drain it a bit for summer maintenance.
How To Pump Water Out Of Pool Using A Pump
Now that you know when you should pump your pool water out, the next thing we’re going to talk about is how to do it.
You can just follow the steps we’ve laid out below:
Determine How Much You Need To Drain
This step will really depend on how high the water is and what you want to do. So, if you see your pool getting too high, determine how much water you want to pump out and create a mental measurement.
Get Your Tools
You’ll need some tools for this process. Some of the most important things to have is an extension cord, a drain hose, a screwdriver, and of course, your pump.
Submerge The Pump
You’ll need to set up your pump by assembling all the parts together. You can follow the instruction manual to do this. Once the pump has been assembled already, you can submerge your pump into the water so it can start draining.
Turn On The Machine
When the pump is already submerged all the way to the ground, you simply turn on the power. But before that, you’ll want to straighten your hose so that there won’t be any blockages in the flow of water. If the hose is fully straight, you can just pump away.
Monitor The Water
The last thing that you’ll want to do is to monitor how much water is being pumped out. This is a pretty important step to do because oftentimes, a lot of pool owners drain too much water out of their pool and instantly regret it. So just make sure that you keep the mental image of your measurement so that you’ll have an estimate of how much water in your pool you want gone.
Conclusion
See how easy it is to pump out the water from your pool? All you need to do is make sure that you learn all the steps on how to pump water out of pool from our guide above.
The next time you want to drain out the water from your pool but don’t know how, don’t fret because our guide here will show you exactly how to do it. All you need to do is strictly follow everything that we have mentioned here and you should have absolutely no trouble.
That being said, we hope that you’ll have a much easier time with your pool maintenance now that you know how to drain out water with a simple pump.
We hope you enjoyed our article and learned something really useful!
Recommended Reading: