There is an easy way to level your pool without having to dig up the ground. If you don’t want the hassle, here’s how to level ground for pool without digging.
When your pool is uneven on one side, there is a considerable amount of digging that you’ll have to do in order to fix this problem.
But what if we told you there is an easy way to do this?
What if we have a method of how to level a pool without even having to dig a small hole?
Yes, you heard it right– it is possible to do that and we will teach you how to level ground for pool without digging in just a few simple steps.
Take a look at them below:
Tools Needed To Level Ground For Swimming Pools
The first step needed to get this job done is to simply get all of your tools ready. Luckily, all of these tools are some basic stuff that you can usually find in any household. The rest of the materials may require you to pay a visit to the department store.
In any case, they’re not hard to find and not at all expensive. Once you’ve gotten ahold of all the stuff you need, let’s continue.
Here are the materials and tools:
- 4 foot level
- 12 foot board
- Metal Rebar
- 1 roll of duct tape
- Ring screw
- Heavy rope
- Garden Hose
At first glance, the number of tools and materials that you’ll need may seem a lot, but trust me, you’ll find that having all of them will make the process much easier and faster. It’s definitely worth it to have all of them on standby since your pool may become uneven from time to time.
With that said, let’s go on to our guide on leveling ground pool without digging.
How To Level Ground For Pool Without Digging
1. Move The Pool
Before anything else, you need to move the pool away from the ground that it was on. The goal here is to make sure that the soil and sand is even, which is why the pool needs to be out of the way.
We recommend that you use your garden hose to first drain at all the water inside. This will make it much easier to take the pool out of the way. Once the pool is put aside, you can proceed to the next step.
2. Put The Metal Rebar In The Wood Board
The first thing you need to do is get one long wood board, let it stand horizontally, then drill a hole on its side at the end of the board. From there, get one metal rebar and hammer it into the drilled hole so that it’ll stay inside.
Now, you will need to make sure that the rebar is drilled deep into the ground as of this point so that you’ll be able to move the board later on.
3. Stick The Level To the Board
Let your board stand horizontally with the metal rebar sticking out. Close to the other end of the board, use some duct tape to stick the level to that area.
4. Tie Your Rope To The Wood Board
Once this is done, go to the very end of the wood board (to the side near the level is taped) and hammer the metal screw to that side of the board. Once the metal screw is tightly fitted in, tie the rope to the ring part of the screw.
5. Even Out The Soil
The last step is to take the string and pull the board around in a circle. This will allow the board to scrape the sand that makes the ground uneven. Do pay attention to the level because this will show you whether or not the ground is evenly leveled.
And there you have it– an easy way to level ground for pool without even picking up a shovel.
We totally understand why digging up a hole in your ground to level your pool can be a real hassle. If the weather is humid and the ground is hard, you’ll use up so much energy that can be used on other things. That’s why this guide on how to level a pool without digging was created in the first place.
If you know how to level ground for pool without digging, you will no longer have to worry about buying a shovel or breaking your back trying to pick up and throw dirt. The only thing you need to do is hammer a wood board to the ground and pull it around in a circle.
It’s as simple as that!