If you’re ground is not even, then your pool won’t have enough ground support. Fortunately, there are some ways on how to level ground for easy set pool.
If you’re going to install an easy set pool somewhere in your backyard, you’re going to need to level the ground. Pools that are placed in uneven ground settings tend to have less support from the flooring. When that happens, your pool may tilt to a corner. That definitely won’t be good for the pool in the long run.
To avoid any future problems, it’s best to learn how to level ground for easy set pool before you install it. That way, you can be assured of its sturdiness.
Contents
What Is An Easy Set Pool?
As the name implies, an easy set pool is an above ground pool that’s easy to set up. All you have to do is find a good spot, follow the instructions on your pool set, and install it there.
It should only take around a total of 6 hours to set up the pool and fill it with water (depends how big it is). That’s why one of the most important parts of setting up a pool is looking for a suitable location.
When Does An Easy Set Pool Become Uneven?
So, when exactly does a pool become uneven? If you didn’t do proper leveling, you’ll notice that your pool will be tilted. The problem with this is that pressure on one side will make the pool collapse– no matter how durable it is.
For instance, Intex pools are extremely durable, but if they’re placed on uneven ground, they will still collapse.
Now, what if you already installed the pool and the ground became uneven due to a storm?
For these situations, you need to start over again with the ground leveling. We’ll teach you how to level ground for Intex easy set pool below:
How To Level Ground For Easy Set Pool (7 Steps)
Generally, there are two ways to level your ground– with digging and without digging. Let’s start with the method that requires digging.
Check out the steps below:
- Mark the area that you want to install your pool in with stakes.
- Clear all the grass and sod from the area.
- Get out your shovel.
- Dig up the high grounds and dump it into the low grounds.
- Level the ground as much as you can.
- Put some sand over the ground (around 1 to 2 inches layer).
- If there are still uneven portions in the ground, you can use the sand to level them.
- Install your pool.
That is the way to level the pool by digging up the ground. If you have little more resources, then you can try this method which doesn’t involve any digging.
Here are the steps you can take in learning how to level ground for easy set pool without digging:
- Mark the area that you want to install your pool in with stakes.
- Clear the grass and sod from the area.
- Buy a rolling tamper.
- Start rolling the tamper on the ground in order to level the ground.
- Put some sand over the ground (around 1 to 2 inches layer).
- If there are still uneven portions in the ground, you can use the sand to level them.
- Use the rolling tamper again to level the sand layer.
- Install your pool.
The method that you choose for leveling your pool depends on what your resources can afford. So, if you can’t afford to buy a rolling tamper, then you have to use a shovel to dig out the high ground to fill in the low areas of the ground. But if you can, you might as well buy a rolling tamper to make things much easier.
Conclusion
The leveling of your ground is extremely important when you’re installing an above ground pool simply because the uneven ground will make the pool collapse. When you fill your pool with water, you’ll add extra weight to the ground. If the ground is uneven, then the pressure will just be on one side. This will surely cause the pool to fall over. That’s why leveling is so important.
If this is your first time owning an Intex pool, then follow these steps in making sure that your ground is even. Learning how to level ground for easy set pool is extremely easy.
Recommended Reading:
