Unleveled ground is a big no-no for above ground pools. We’ll teach you step by step how to level ground for above ground pool, as well as the things you need.
There will be times when your above ground pool may get lopsided because the ground underneath sank.
This is usually due to rainy weather, drainage problems, and other things. Should this happen to you, you need to balance the ground right away because the pressure of your above ground pool will move to just one side. When this happens, your pool will eventually break down.
That’s why we’ll teach you how to level ground for above ground pool in just a few steps.
Things To Prepare For Leveling An Above Ground Pool
The first thing to do when you fix your above ground pool leveling problems is to gather your tools. What exactly do you need for this job?
Here’s a shortlist:
- A couple of stakes
- Wood plank
- Carpenter’s level
- Rolling tamper
- Water source and garden hose
All of these things can usually be found in any tool shed. If not, then you can easily find them in a hardware store. Don’t worry too much about spending a little extra on your pool because these tools will be helpful in the event that the ground below your pool drops again.
With that out of the way, let’s get to our guide on how to level ground for easy set pool.
How To Level Ground For Above Ground Pool? (8 Steps)
1. Move Your Above Ground Pool
Before anything else, you’ll need to move your pool. You can drain your pool so it’ll be easier to move it aside for the time being.
2. Look For The High Spots
Once you’ve moved your above ground pool, the next thing you should do is to get an idea of what parts of the ground are elevated and which parts aren’t.
The easiest way to do this is to lie a plank down on the ground and put a carpenter’s level on top of it. You can then move the plank to various areas where you placed your pool. This will give you an idea of which parts of the ground are uneven.
To make things easier, you can use a stake to mark these areas.
3. Level The Ground
From here, take out your shovel and dig up the high spots. After that, put the high spots into the low spots. Try to use the back of the shovel to flatten the land.
4. Clear Off The Debris
When the ground is flat, you’ll have an easier time spotting debris– especially sharp types. You can use your rake to take out any debris which may cause harm to your pool. If you spot any debris, just rake them away to the side.
5. Add Some Sand
In order to harden the land, you’ll need to add a little bit of sand on top of the soil. We recommend that you add 2 inches of sand on top of the soil so that the soil has a thick enough shield for when you put the above ground pool on top of it.
6. Completely Flatten The Sand
Bring out your tamper and roll the sand. This will completely flatten any small uneven areas. Rolling the tamper will also make sure that the sand is compacted properly so that the ground won’t collapse in the future.
If you want it further compacted, you can even spray some water all over the sand. If you don’t want to buy a tamper, you can always rent one. There are a lot of garden stores or hardware stores that rent out big equipment like this.
7. Treat The Land
The last thing you’ll want to do is to treat the land. You see, there will be times when fungus will grow on your land. This is because it will be constantly wet from the water coming out of the pool.
In order to prevent the growth of fungus, you need to treat the land with fungicide. This will prevent the growth of those annoying fungi and also kill the existing ones.
8. Level The Land Again
This is just an extra measure to see if what you did was correct. You can use your plank with the level to check. Once you’ve gotten a flat land, then you can put the pool back.
If you’re looking for the easiest and the cheapest way to level ground for above ground pool, then this is it. From a glance, you may think that there are a lot of steps involved. However, you’ll eventually realize that all of these steps are pretty easy and quick to do. If you have all the tools involved, then you should be able to get this job done in no time.
If there is anything we missed in these steps, leave a comment below. If you enjoyed this article on how to level ground for above ground pool, share it with your friends who have above ground pools!