A sagging cover makes your pool look ugly and unsightly. Preserve the beauty of your pool by learning how to keep pool cover from sagging with our tips!
So, you want to protect your swimming pool from falling debris, contaminants, and bacteria brought by strong wind?
However, the cover lose its shape and starts to sag within minutes after setting it up.
What’s the matter? How to keep pool cover from sagging and preserve the appearance of your pool area even when not in use?
Simple! You just need to ensure that you follow our recommended steps in the succeeding sections.
Today, we will tackle the reasons why a pool cover sag, as well as some tips on how to keep pool cover from sagging.
Let’s get started!
Why Does Pool, Cover Sag?
There are several reasons as to why a pool cover is sagging. But the most common ones are listed below:
Added Weight Caused By Fallen Leaves And Debris
The main function of pool cover in the first place is to protect the pool water from leaves and debris brough by strong wind. Therefore, when these leaves (that sometimes still have twigs and branches) and debris pile up on top of the cover, adding to its original weight. As a result, the cover will sag.
In the long run, the material of the pool cover will not hold the added weight and might sag permanently.
The Cover Caught Snow During Winter.
After the winter season, snow usually pile up on the pool cover as well, especially in places where in winter can get quite extreme.
In some cases, the snow can be in the form of solid blocks or frost, which will cause the pool cover to sag.
So, how to keep pool cover from sagging?
Scop the snow out of the pool cover from time to time. It is not a wise idea to leave the snow until the winter season ends. The snow may get too heavy and will tear the cover. Once the snow gets into the pool, this could cause internal damage to the pool’s system as well.
Low Water Level
Aside from fallen leaves and debris, low water level inside the pool also causes the cover to sag.
If you have scooped out the snow and leaves out of the top of the pool cover, but it still sag regardless, then check the water level inside.
It is recommended to keep the water to be on the same level with the pool’s edges. This will help keep the pool cover retain its shape. At the same time, this will make it easier for you to remove the snow and leaves.
How To Keep Pool Cover From Sagging?
Here are some ideas to keep pool cover from sagging:
- Grab the edge of the pool cover and pull the cover back firmly. Once the cover entirely protects the pool, secure the edges of the cover with pins and recommended metal locks.
Do not settle with just huge rocks, bricks, or cinder. These will be pulled in eventually, making the pool cover sag again.
- As mentioned above, scoop the leaves, snow, and other debris regularly. Do not wait that the cover shows signs of sagging. Prevent this from happening instead.
Moreover, the dried leaves accumulated on top of the pool cover may bring bacteria and fungi that can contaminate the pool water.
- Some long-time pool owners also recommend that you put styrofoam on the pool water’s surface. After which, you can now add the cover on top of the styrofoam.
The styrofoam will just float on the surface and will prevent the cover from losing its shape. However, some people avoid using styrofoam as this is not really eco-friendly and gets brumbled easily when exposed to water for a long time.
- Mesh cover is also a great alternative. You can put a mesh cover instead as this keeps the water flow naturally while keeping the leaves and big clumps of debris from entering the pool.
Now that you know how to keep in ground pool cover from sagging, please spread the information with others by sharing the article’s link to your friends and family!