Sand settles at the bottom of the pool, making them difficult to remove. We’ve got some of the best tips on how to get sand out of pool – the easy way!
You’re here because of the bottomless sand in your pool. We know that is really annoying, especially if you only want nothing but the cleanest and most refreshing pool water to swim in.
If you want to know how to get sand out of pool, you are reading the right content.
It’s time to make every swimming session this summer enjoyable without the uncomfortable feeling of rough sand underneath.
Join us as we discuss the must-do steps:
Contents
Why Are There Sand In Your Pool?
We always believe that prevention is so much better than actually solving or treating pool problems. If you are aware of what causes these problems, then you can take the necessary precautions to avoid these from happening.
And that is exactly why you need to know how did sand get into the pool, anyway?
Strong wind is one of the reasons for this; the wind carries dust and sand particles and gets them into your pool water.
Another reason is a crack in your sand pool filter. Thus, some of the sand escape from the tank and now settle at the bottom of your pool.
Lastly, you could be the culprit. If you don’t practice taking a shower before swimming in your pool, then dust and sand that cling to your clothing may be the carrier of sand and gets them into the pool.
How To Get Sand Out Of Pool (The Easy Way)
Getting the sand out of the pool is actually easy as it seems. In fact, there are only 5 basic steps in getting rid of sand in your pool.
Check them out now:
1. Check For Cracks And Leaks In Your Sand Pool Filter
This is usually the common reason why sand get into your pool. That is why the best thing to do is to check for cracks and leaks in your sand pool filter.
Once you confirm that there is indeed a crack, replace the pool filter immediately. It is not advisable to try fixing the cracks as they will only leak more sand in the future.
How to get sand out of pool? You must cut its source first.
If you worry too much about sand getting into your pool, you can always opt for a cartridge pool filter. Sand filters have the tendency to leak sand particles in your pool in the long run. If it bothers you that much, change your sand pool filter to another filter type.
2. Start By Skimming The Pool
The next step is to get rid of the large debris, algae clumps, and other particles from the surface of the pool.
To do this, you need a pool skimmer. Pool skimmers are a piece of pool equipment commonly used to skim the surface of the pool, collecting debris and algae, preventing them from settling at the bottom.
The skimmer flap prevents the leaves, debris, and algae from re-entering the pool. Still, you need to clean the skimmer regularly.
3. Brush The Walls And Floor Of The Pool
Once you are done collecting the larger clumps, it is time to scrub off the deposits on the walls and remove any dust and sand that settles at the bottom, corners, and crevices of the pool.
4. Backwash The Pool
After skimming and brushing, it is time to backwash the pool. Backwashing is a pool cleaning set up in which the dust, sand, and debris trapped in the filters are flushed out of the filters and into the waste pipe of the pool.
Do this two more times to ensure all the trapped sand and dust are out of the filters. After this, proceed to rinse and then close the filter.
5. Vacuum The Pool
The final step is to vacuum the pool.
How to get sand out of pool for good? Easy! Vacuum the entire pool twice.
Pool vacuums suck in all the dust and sand present in the water, regardless if they are at the bottom or on the surface. Some advanced pool vacuums also remove oil in the water, giving you fresh and clean water.
When vacuuming, aim at the spot where the sand usually settles and hides, such as in the corners, behind the stairs and ladders, as well as the crevices of the tiles.
Recommended Reading:
