How to get rid of too much algaecide in pool is easier when you know the right steps and the most effective pool chemical to use. Click here to know the answers!
A cloudy and greenish swimming pool is not ugly to look at but also dangerous that can put the swimmers’ health at risk. Furthermore, no one wants to swim in a contaminated swimming pool.
So, if you have been experiencing the same problem and have been seeking ways to bring back the crispiness of your pool water, then this guide is for you.
Read on and learn the right way on how to get rid of too much algaecide in pool:
Contents
What Is Algae in Pool?
There are basically three types of algae that can breed in swimming pools, namely: the green algae, the mustard algae, and the black algae.
Green Algae (Also Known As Chlorophyta)
This is the most common algae that a lot of pool owners suffer from. The good news is that this is also the easiest to kill and the easiest to prevent.
The main causes of green algae growth in pool are the lack of sanitation and filtration. This is usually the case when the pool is left unused for a long period of time.
Mustard Or Yellow Algae
The reason why this type of algae appears in your pool water is due to the pollen or sand that accumulates on the pool floors and in the corners and edges.
Similar to the green algae, lack of sanitation, filtration, and good water circulation are what allow the algae to develop.
The only problem with this type of algae is that it is mostly chlorine-resistant. Thus, the normal pool shocking is no longer enough to prevent yellow algae.
Black Algae (The Hardest To Kill)
This is known to be the hardest algae to kill. In fact, it is actually not algae at all. This is caused by certain bacteria that infected the water. One known type of bacteria that causes the water to appear black is the Cyanobacteria.
What Is Algaecide?
Algaecide is a specifically formulated chemical for killing algae. The composition of most algaecides includes a copper-based compound, either copper chelates or copper sulfate.
So, what happens if there is too much algaecide in the water?
A good indication that there is too much algaecide in pool is when the water turns foamy. The smaller the foam and bubbles are, the higher the algaecide content is.
Is it dangerous? It is generally safe for swimming but too much of it can cause skin and eye irritation.
How To Get Rid Of Too much Algaecide In Pool (Quick Guide)
- There is no special trick in correcting too much algaecide in pool. The foam and bubbles caused by the high algaecide level in your pool will breakdown on its own. The best step is to wait for the bubbles and foam to subside a bit.
- The natural evaporation and backwash cause the algaecide concentration to decrease.
- When the foam takes way too long to dissipate, just drain the pool partially and then add fresh water to balance the water chemistry.
- Lastly, allow the pool water to circulate by running the filtration for around 2 hours. This will help the algaecide to be fully mixed with and dissolve in the water.
- If the above steps still don’t work, it’s time to add chlorine or any anti-foam chemical to the water.
Friendly Reminders:
- It is recommended to use a non-foaming algaecide to minimize the foaming effect.
- Only apply a few ounces of algaecide once every two weeks if you constantly conduct pool filtration in your pool. If you rarely do so, apply algaecide once a week.
- Take a shower before swimming in the pool, the bacteria, pollen, and other contaminants in your clothing may be a carrier of algae.
- Also, make it a rule to only swim in your pool wearing the appropriate swimming suits and trunks.
How to get rid of too much algaecide in pool is so easy, isn’t it? Follow the steps above and update us afterward!
Thanks for reading!
