It’s better to drain your above ground pool in the fastest way possible so you can use it. This guide will show you how to drain an above ground pool quickly.
The advantage of having an above-ground pool is that you don’t need to drain it every time. However, there will be times when you’ll need to drain your pool.
You also need to drain the swimming pool when the water is dirty when you need to shock it, when you’re starting a new season, and when you need to replace the pool liner.
In any case, there is a very easy way to do this job.
Here are the quick and easy steps on how to drain an above ground pool in the most efficient way possible:
Contents
How To Drain And Above Ground Pool Completely
Step 1: Have An Area Where You Can Put The Drained Water
First of all, you need to make sure that you know exactly where you’re going to put the drained water. Sure, you may say that you can drain it in the sewage system but there are some local municipalities that have rules about this. Check with the policies of your municipality about where you can dump pool water and prepare from there.
Step 2: Siphon The Water
The next step is to start siphoning the water. What we recommend is to use a garden hose and a faucet to do this because this is the easiest and fastest way to siphon. However, you will need a spigot.
To do this method, you will need to attach a hose to the spigot and start siphoning the water. Do take note that the other end of the hose may move around and spray water all over the place if left unattended. Thus, you’ll probably need one of those clamps to hold the hose down so it doesn’t move around.
Step 3: Start The Draining Process
Now that you’re all set, you need to then put the hose inside the pool. Slowly, the hose will drain the pool of any water. When you notice that the water is drained to up to four feet of the hose, then you may slowly take away the clamp.
If not, just leave the hose there. In this process, all you need to do is just wait until all of the water goes out of the pool.
Step 4: Take Out Any Water Left
Now that the pool has been drained, there will probably be some residual water in the pool still. You may want to take it out in order to make room for fresh new water. You’ll especially need to take away any drop of water if you plan on replacing your liner.
In order to do this, all you need to do is get out your pump and suck all the extra water out. Before you replace the liner, make sure that everything is dry so that bacteria won’t grow.
Another way to do this is to learn how to drain an above ground pool with a sand filter. In order to use a sand filter, you just need to turn off the pump, place the backwash hose to the draining area, place the filter in Waste mode, and turn the pump back on. With this, you can completely drain out all the excess water in the pool.
Step 5: Fill Up With New Water
Now that your pool is fully drained, all you need to do is put the new water in. You can attach a hose to a water source and fill the pool with water. From there, you can shock the freshwater and add the necessary chemicals used to balance the pool. After that, you can jump in and enjoy a nice swim!
Conclusion
See how easy it is to learn how to drain an above ground pool?
You can do the whole simple process in just 5 steps! So, what are you waiting for? Get draining right now so you can enjoy your pool for the summer.
With our surefire steps, draining your pool won’t be hard at all. After all, we created one of the quickest and most efficient processes on draining pools that you can find.
We hope that you were able to learn something from our guide. If you enjoyed it, share our article with your other friends that own an above ground pool. We’re sure that they can benefit from it as you did.
Recommended Reading: