What is the best way to clean pool tiles? We’d definitely say with a vinegar solution. Here’s a very simple guide on how to clean pool tile with vinegar.
If you were to ask us what the best yet inexpensive way to clean pool tiles is, we’d most likely tell you scrubbing with vinegar.
Of course, you may ask us how to clean pool tile with vinegar effectively and without damaging the material.
In this guide, we’ll discuss the steps on cleaning pool tile with vinegar the proper way the next time you want to give your pool a good scrub.
Is It Safe To Use Vinegar On Pool Tile?
Before we begin, we’d first like to address a very common question that most pool owners have about cleaning their pool tiles with vinegar.
Is it safe to use on pool tiles?
Will it actually wear out the material faster?
The answer to the first question is yes and the answer to the second one is no. Since vinegar is non-toxic, it is safe to use on pool tiles and won’t damage the pool tile material. In fact, vinegar works wonders on tiles that have calcium scale buildup.
However, we do recommend that you use it on the earlier stages of the buildup as vinegar may not fully help for a severe scale buildup.
With that out of the way, let’s move on to our guide.
The Vinegar And Baking Soda Mixture
Now, a lot of pool owners don’t use vinegar as a cleaning tool in isolation. Oftentimes, they mix it along with baking soda to make the solution more powerful. If you’re cleaning pool tile with vinegar and baking soda, you’ll notice that you can take out the grime and calcium faster and more thoroughly.
So, how much solution do you make in order to clean your pool?
Well, this really depends on the size of your pool. However, the magic ratio here is 1 cup vinegar to 1 cup baking soda. You can follow that formula when determining how much you need.
How To Clean Pool Tile With Vinegar And Baking Soda
Create Your Mix
First of all, you need to create your mix. As mentioned above, use the formula of 1 cup vinegar and 1 cup baking soda when making your solution. Mix well until it forms a bit of a paste.
Start Scrubbing All The Tiles
Get a scrubbing brush and start scrubbing the paste on all tiles. Make sure that there is no spot that is not covered by the paste.
Leave The Solution
Once you have filled all the tiles with the solution, leave it on for around 15 minutes. This is done just to loosen up the scale buildup. If 15 minutes is not enough, then you may leave it on for 30 minutes until the calcium scale is totally loose.
Do a Second Scrub
After the duration of 15 to 30 minutes, you must now do a second scrub on the tiles. It is in the second round that you can scrub off the stubborn grime and calcium scale. Also, make sure that you concentrate on the parts with extra dirt and scale. If the grime and scale still don’t come off, apply an extra layer and leave it for 10 more minutes.
Rinse The Pool
Once all of the scale and grime have been scrubbed off, the last step is to simply rinse the tiles. You can do this by bringing out your garden hose, attaching it to your water source, and start spraying away. Again, focus on the areas that had thick dirt so you can give it a thorough wash. Make sure that all the paste and dirt are hosed down the drain.
And in just those 5 simple steps, you were now able to clean your pool tiles effectively.
The beauty of using this solution is that it not only rids the tiles of dirt but it also leaves a fresh smell after it dries out. That is why this is one of the most preferred cleaning methods of most pool owners.
So, if it is your first time owning a pool, always keep this cleaning method in mind. It is extremely effective and ensures that your pool will be ready in no time. Just get your materials ready and refer back to this guide on how to clean pool tile with vinegar.