Haven’t used your pool in a long time? No problem! You can learn how to clean a pool that has been sitting there for years. Read our guide now!
If you have a pool that’s been sitting there for many years, you probably won’t want to swim in it because of hygienic reasons. However, this doesn’t mean that you shouldn’t clean it up. After all, you won’t know when you’ll want to use the pool again.
Thus, if you’re faced with a really dirty and seemingly unsanitary pool, then here are some tips on how to clean a pool that has been sitting for years so you can use it again.
In this article, we’ll show you exactly how.
Contents
Things To Check When Restoring Unused Pool
When a pool hasn’t been used for ages, then it’s most likely in really bad condition. That’s why the best way to clean pool that has been sitting is to restore it. In order to do so, you’re going to need to check the parts of the pool and the pool equipment first. There are three things you need to watch out for: the filtration, the water inside, and the possible cracks or leaks.
We’ll go through them one by one:
Filtration
First off, let’s talk about the filtration system. The filtration system will most likely be filled with a lot of debris, branches, leaves, and other things that may block it. The first thing that you need to do is get rid of all those things. You need to make sure that you clear it out until everything is pushed out of the system.
Also, don’t forget to clear it out often so that it won’t get clogged. If it is way too damaged, then you may need to replace it.
Water
The next thing to think about is the water. Obviously, your pool is going to have some really dirty water if you’ve left it alone for years. In order to clean up your pool, you need to clean up the water. First of all, you need to clean up the algae. You can do this by putting chlorine and using some pool tests in it. Just follow the instructions and make sure your pool water has the appropriate pH and chlorine levels.
Leaks
Lastly, you need to check for any leaks and cracks on the body of your pool. If you see any cracks, you need to first assess how bad they are. If they are pretty light, you may want to patch them up or repair them. But if it’s pretty big, you may want to reline the pool.
Now that you know how to assess the condition of the pool, the next thing to do is clean it up. We’ll teach you how to clean above ground pool that has been sitting in the next section.
How To Clean A Pool That Has Been Sitting For Years?
We’ll teach you how to clean pool that has been sitting for years in these steps below:
1. Fix Any Cracks
First, you have to fix all of the cracks that are found on your above ground pool. You can patch it up, reline it, or ask a professional to fix it.
2. Drain The Pool
You need to drain your pool if there happens to be a lot of debris. It’s best if you use a trash pump that can suck out all the leaves, dirt, and twigs.
3. Fill The Pool
Some of the water may have already escaped so if you want, you can refill the pool a bit before you balance the chemicals.
4. Balance The Chemicals
Once the pool is cleaned up, you’ll need to balance the alkalinity, hardness, pH, and other chemicals in the pool. You can shock the pool until it turns bluish. You may also use a clarifier to get rid of extra particles.
5. Do Maintenance
Lastly, you need to do some maintenance work. This means draining the pool regularly, cleaning it from time to time, and checking the chemicals on a regular basis.
Conclusion
If you happen to have a pool that’s been sitting there for years that you want to fix up, now’s the time.With this guide on how to clean a pool that has been sitting, you can restore your pool and use it again.
Recommended Reading: