You don’t need to spend money on buying a brand-new pool cover because it’s easy to make one. You just need to know how to build a pool cover from pvc pipe.
What’s the best way to keep rain, bugs, and dirt away from your pool?
Putting a pool cover over it, of course!
This ensures that your pool is fully protected from things that you don’t want inside. But it can be a hassle to go down to the store to buy one or wait for an online order to arrive. So, if you are up for the challenge, then here’s the next best thing.
Well, you can actually make a DIY PVC pipe pool cover.
Contents
How Do I Make A PVC Pool Cover?
Don’t worry, it’s not very hard to do. All you need are a few tools and the steps on how to build a pool cover from pvc pipe.
Tools And Materials Needed
In order to start knowing how to make a pool cover with pvc, you must first gather all the materials you need to make this homemade project.
Here are a few of the things that you’ll need:
- 1-inch diameter PVC pipe that spans your pool size
- PVC pipe fittings
- 90-degree elbow pieces
- Pipe end caps
- PVC adapter sections
- Appropriate screws
- Sandpaper
- PVC glue
- Vinyl tarp
As for the materials, you can probably find them at home. These are the things you’ll need:
- Screwdriver
- Electric drill
- Hack saw
How To Build A Pool Cover From PVC Pipe In 7 Easy Steps
Now that you have everything that you need in order to build this, now’s also the time to learn the steps on how to build a pool cover reel from pvc pipe.
There are seven very easy steps you can follow in order to complete this project.
Here we go:
1. Get The Exact Size Of Your Pool
When you buy your PVC pipe, it’s always good to overestimate the size of your pool so that you can make adjustments when you’ve already started. In this step, all you need to do is simply measure the exact length of your pool.
2. Glue All The Sections Together
We’re going to assume that your pool is pretty big which means that you probably needed to buy several PVC pipes. If you did, then you need to use the glue to stick them together. All you need to do is to stick the sections together to create a big pool cover.
3. Add End Caps
Get your end caps and install one on one end and another on the other end. After that, get your 90-degree PVC elbow piece to the end of your pipe over the end cap. After that, put the other elbow piece on the other end cap.
This now creates your hand crank. What’s the use of this? Well, it can be used for rolling your pool cover when you want to use your pool.
4. Attach The Pipe To Your Vinyl Tarp
Get your hacksaw and cut 3 parts of the pipe to make the clips. Then bring out your vinyl tarp and pin the ends of the tarp to the pipe. Make sure that the clips hold the tarp and pipe in place. Once everything is attached, you can paint it if you want. But this step is pretty optional.
5. Drill Holes In The Clips
Take out your electric drill and create holes in the areas where your clips are.
6. Attach The Clips Properly
Get the long end of the PVC pipe, then put the clips alongside the pipe. Make sure that the holes that you drilled are aligned with the clips. After that, get your screws and screw them into the holes. Make sure that they’re screwed on tightly so that the cover won’t fall apart.
7. Test It Out
The last thing to do is to simply test the product out. Roll it out over your pool and leave it overnight. If everything works out fine, then your cover is perfectly made.
Conclusion
And that is how to build a pool cover from pvc pipe in just seven steps. Did you find our Pool cover hacks easy? If you did, then try it out today and maybe share our short guide with some of your friends. It’ll also help them the same way it was able to help you.
We hope you enjoy this guide and have fun with your pool!
Recommended Reading:
- How To Open An Above Ground Pool?
- Best Pool Vac Head Reviews 2021
- Best Above Ground Pool Vacuum For Intex 2021
- Best Inground Pool Covers Reviews 2021